Pack of 10 - RGB LED Panel Lamp - 12VDC


Pack of 10 - RGB LED Panel Lamp - 12VDC
Stock Number: 37251 LA
 Review Average:  
 Number of Reviews: 3
 View ReviewsReview this item
$4.95


This item is NO LONGER available. Please use our SEARCH feature and see if you can find an alternate item for what you were looking for.
This item is no longer available


SHARE
    
     Email this to a friend     

Detailed Description

Sold as Pack of 10
Unique moisture resistant, RGB LED Lamp. Molded Water Clear case with "Faceted" top.
Originally used as a specialty upholstery decoration but a qreat panel indicator.
Mounting thickness: ~ 5mm to 30mm
Mounts in 13mm Hole.
Includes M12x1.50 Clear Plastic HEX Nut
Each LED can be individually lighted.
12V DC @ ~20mA/LED.
6in, 4 conductor cable terminated with a MOD Phone 4P4C Handset plug.
Blue LED - Black Wire - Connector Position 1
Red LED - Green Wire - Connector Position 2
Green LED - Red Wire - Connector Position 3
Common Cathode - Yellow Wire - Connector Position 4
L: 45mm (Body) DIA: 20mm max WT: .3/pac


California Proposition 65 Warning WARNING: This product can expose you to chemicals including Nickel which is known to the State of California to cause cancer and which is known to the State of California to cause birth defects and/or other reproductive harm. For more information, go to www.P65Warnings.ca.gov



 Product ReviewsClick here to review this item
Good LED Indicator Light for the Price
No wiring information was provided for the RJ11 connector, but is Yel - Common, Grn - Red LED, Red - Green LED, Blk - Blue LED. Adequate brightness is available at only 5 volts. Backshell nut provided for panel mounting doesn't fit over the RJ11 connector, so it must be cut off and replaced if used in this way.
- Bob, CO
 
Cheap and Decorative Panel Lamp
I use these as panel lamps. They work well. I purchased online a breakout module that has the RJ connector on one end and a terminal block on the other end. This makes it easy to wire them - otherwise I would have to cut off the connector, strip the outer insulation, strip the individual conductors, and splice the wires with solder and heat shrink tubing. For individual projects I am making for myself not a production run, stripping and splicing the wires make it super-economical.
- Sean C, CA
 
nice leds
Nice rgb leds for the price. Connector is 4 pin phone line plug not handset plug
- Michael Chwojdak, NY